STERN GARAGE
The yacht has an extended full beam garage with hydraulically powered watertight door which operates as a swim platform when lowered. The area provides storage for one twin seater jetski and water sports equipment, access is via steps from main deck, through watertight door.
INTERNAL AREAS:
- All interior areas, are fitted with “floating” floors, walls & ceiling, engineered to minimize noise and vibration. Sound proofing and thermal insulation is fitted in all areas.
- Spacious layout with good high headroom in all entertaining areas (2.2M) & (2.1M) clearances.
- Interior fitted out with Mahogany veneering and timber work, high class light fittings, carpets, and fabrics curtains to interior architect directions (Refer M.Y. Ligaya interior to reference to quality and standards.)
HULL EXTERNAL:
- Hull paintwork mirror finished using Awlgrip marine products. Both hull and superstructure are shaped and faired with mirror finish using polyester urethane marine top coatings. All finishes have been applied by European master painter.
- The propeller selection is skewed and handed 4 blades balanced and polished to minimize vibration.
- Rudders are offset outboard to maximize turning short with full helm, and also to facilitate drawing the propeller shaft.
- Main deck areas, external are decked with 15mm Teak certificated. Planks are finger joined and Sikaflex corked along joints.
PLUMBING AND WIRING ETC.:
- Plumbing systems such as hydraulic, electrical wiring and airconditioning ducting, installed to the highest International, industrial and marine standards and Lloyds compliant
- Machinery is professionally well laid out and installed. Pipe work and cable runs placed below the engine room floor plates. All strainers, valves, cocks, flow metres, etc are easily accessible.
- Equipment and machinery selection is of the highest international standards. Vessel is capable of coping with the differing international port voltages with predominant system being 380V 50 cycles and 24 volt DC. All circuits are protected with rated circuit breakers. All electrical bulkhead penetrations to survey standards. Main switchboard cubicle is stainless encased cubicles.
Photos:
Plans:
|
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}